Need help? Just email keith@dlpc.com.au - Phone 07 3823 4844 - Fax 07 3823 4866Semiconductors
Digital Linear
and Passive Components sources an exhaustive range of semiconductors,
including: Hall
sensors, Power
Management Switching Regulators,
Linear
& Shunt Regulators and ICT PLD's,
USB
Power Switch & Reset IC's,
Amplifiers,
Diodes
& Rectifiers,
Transistors,Fets
& Mosfets, Zener
TV's & Protection, Temperature
Sensors, and Low
On-Resistance Analog Multiplexers and Switches & Universal Transducer
Interfaces(UDI's).
Among others, we source all the big brands including Recom,
Luminary
Micro, Mornsun,
Zywyn, and
Assemtech / Comus.
Tilt/Tip (Tip Over Switches)
TILT AND TIP-OVER SWITCHES TILT SWITCHES Tilt switches are used to sense movement (tilt) of a device
above and below a horizontal axis. A typical use is in a thermostat.
A glass mercury switch is mounted to a bi-metallic spring which
expands and contracts with temperature. As the spring moves,
the switch contacts pass through the horizontal plane, opening
or closing to operate the furnace or boiler. The angle through
which the switch must move for proper operation – the
differential angle – is measured from the point of just
make to just break; it is specified as a maximum. When selecting
a tilt switch, it is important to ensure that the operating
mechanism can move the switch through an angle greater than
the differential angle. Some additional applications include:
level controls, appliances, security alarm systems, toys and
games, float switches and water-treatment equipment (non-mercury)
. TIP -OVER SWITCHES Tip-over switches sense tilt over 360° of a vertical axis.
A common use is in portable heaters used in the home to prevent
electrical shock or fire. When the heater tilts more than a
specified angle, the switch operates turning the heater off.
This angle, called the operating angle, describes the angle
from vertical to the point of contact operation, subject to
a tolerance, ie. 45° ± 10° (35° to 55°).
Both normally closed (tilt to open) and normally open (tilt
to close) switches are available. Some additional applications
include: portable lamps, PC anti-theft devices, vending-machine
alarms and machinery security systems Tilt switch:Ball contact
The tilt and tip-over switches and motion sensors are available
as mercury metal and our patented non-mercury metal (patents
#5.209.343 and #5.332.876.). Mercury glass tilt switches are
also available. All switches are evacuated, filled with inert
gas and hermetically sealed to ensure long life and low contact
resistance.
Tilt switch: Opto
Tilt switch: Micro miniature
Tilt switch: Non mercury contacts
Tilt switch: Surface mount
Tip over switch: Ball contact
Electronic Tilt sensor
Number
Switching Voltage:
120Vac Max.
Switching Current: 0.5A Max.
Switching Capacity: 50VA Max.
Operating Angle: 50°± 15°
Contact Resistance: 3.0 Ohms Max.
Size: Over All Length: .670in (17.0mm)
Diameter: 0.185in (4.7mm)
Electrode Diameter: 0.018in (0.46mm)
Electrode Spacing: 0.116in (2.79mm)
Tip-Over Switch - General Purpose - Omnidirectional
Switching Voltage:
120Vac Max.
Switching Current: 0.25A Max.
Switching Capacity: N/A
Operating Angle: 60°± 15°
Contact Resistance: 3.0 Ohms Max.
Size: Over All Length: .870in (22.1mm)
Diameter: 0.185in (4.7mm)
Electrode Diameter: 0.018in (0.46mm)
Electrode Spacing: 0.050in (1.27mm)
Tip-Over Switch - General Purpose - Miniature
Switching Voltage:
120Vac Max.
Switching Current: 0.25A Max.
Switching Capacity: 60VA Max.
Operating Angle: 60°± 10°
Contact Resistance: 3.0 Ohms Max.
Size: Over All Length: .665in (16.89mm)
Diameter: 0.185in (4.7mm)
Electrode Diameter: 0.040in (1.016mm)
Tip-Over Switch - General Purpose
Omnidirectional
Switching Voltage:
120Vac Max.
Switching Current: 0.25A Max.
Switching Capacity: 60VA Max.
Operating Angle: 60°± 10°
Contact Resistance: 3.0 Ohms Max.
Size: Over All Length: .665in (16.89mm)
Diameter: 0.185in (4.7mm)
Electrode Diameter: 0.040in (1.016mm)
Electrode Spacing: 0.111in (2.82mm)
Tip-Over Switch - General Purpose
Omnidirectional
Operating Angle:
45 +/- 15 Deg Max
Switching Voltage: 120 Vac
Switching Current: 0.5A
Size: L: 9.5mm (.374in) Dia: 8.2mm (.323in)
Compact tip-over switch - Normally closed contact
Switching Voltage:
120Vac Max.
Switching Current: 1.0A Max.
Switching Capacity: 100VA Max.
Operating Angle: 45°± 10°
Contact Resistance: 3.0 Ohms Max.
Size: Over All Length: .813in (20.65mm)
Diameter: 0.322in (8.19mm)
Electrode Diameter: 0.040in (1.016mm)
Tip-Over Switch - General Purpose
Omnidirectional
Switching Voltage:
120Vac Max.
Switching Current: 1.0A Max.
Switching Capacity: 100VA Max.
Operating Angle: 45°± 10°
Contact Resistance: 3.0 Ohms Max.
Size: Over All Length: .813in (20.65mm)
Diameter: 0.322in (8.19mm)
Electrode Diameter: 0.040in (1.016mm)
Electrode Spacing: 0.188in (4.76mm)
Tip-Over Switch - General Purpose
Omnidirectional
Contact Resistance:
3 Ohms Max.
Switching Voltage: 240 Vac Max.
Switching Current: 0.4A at 240 Vac / 1.0A at 120
Vac
Operating Angle: 45¬ ¬ 10¬
Size: L: 15.8mm (.622in) Dia: 8.2mm (.323in)
Normally Open Contact
Contact Resistance:
3 Ohms Max.
Switching Voltage: 240 Vac Max.
Switching Current: 0.4A at 240 Vac / 1.0A at 120
Vac
Operating Angle: 45¬ ¬ 10¬
Size: L: 20.8mm (.819in) Dia:
8.2mm (.323in)
Normally Open Contact
Switching Voltage:
120Vac Max.
Switching Current: 1.0A Max.
Switching Capacity: 100VA Max.
Operating Angle: 60°± 10°
Contact Resistance: 3.0 Ohms Max.
Size: Over All Length: .813in (20.65mm)
Diameter: 0.322in (8.19mm)
Electrode Diameter: 0.040in (1.016mm)
Tip-Over Switch - General Purpose
Omnidirectional
Switching Voltage:
120Vac Max.
Switching Current: 1.0A Max.
Switching Capacity: 100VA Max.
Operating Angle: 60°± 10°
Contact Resistance: 3.0 Ohms Max.
Size: Over All Length: .813in (20.65mm)
Diameter: 0.322in (8.19mm)
Electrode Diameter: 0.040in (1.016mm)
Electrode Spacing: 0.188in (4.76mm)
Tip-Over Switch - General Purpose
Operating Angle:
45 +/- 15 Deg Max
Switching Voltage: 240 Vac
Switching Current: 0.4A at 240Vac/1.0A at 120Vac
Size: L: 9.7mm (.382in) Dia: 8.2mm (.323in)
Standard switch - Normally
closed contact
Operating Angle:
45 +/- 15 Deg Max
Switching Voltage: 240 Vac
Switching Current: 0.4A at 240Vac/1.0A at 120Vac
Size: L: 9.7mm (.382in) Dia: 8.2mm (.323in)
Standard switch - Normally
closed contact
Contact Resistance:
3 Ohms Max.
Switching Voltage: 240 Vac Max.
Switching Current: 0.4A at 240 Vac / 1.0A at 120
Vac
Operating Angle: 45° ± 15°
Size: L: 15.9mm (.626in) Dia: 8.2mm (.323in)
Normally Closed Contact
Switching Voltage:
120Vac Max.
Switching Current: 1.0A Max.
Switching Capacity: 100VA Max.
Operating Angle: 45°± 15°
Contact Resistance: 5.0 Ohms Max.
Size: Over All Length: .560in (14.22mm)
Diameter: 0.322in (8.18mm)
Electrode Diameter: 0.040in (1.0mm)
Electrode Spacing: 0.500in (12.7mm)
Tip-Over Switch - General Purpose
Switching Voltage:
120Vac Max.
Switching Current: 12.5A Max.
Switching Capacity: 1500VA Max.
Operating Angle: 35°±10°
Contact Resistance: 5 Ohms Max.
Size: Over All Length: 0.705in (17.9mm)
Diameter: 0.768in (19.5mm)
Electrode Diameter: 0.094in (2.38mm)
Tip-Over Switch (Normally Closed)
Heavy Duty Switching 
Contact Resistance:
5 Ohms Max.
Switching Voltage: 240 Vac
Switching Current: 7.0A at 240 Vac / 12.5A at
120 Vac
Operational Angle: 35¬ ¬ 10¬
Size: Dia: 23.1mm (.909in) H: 11.4mm (.449in)
Normally Closed Contact
Switching Voltage:
120Vac Max.
Switching Current: 12.5A Max.
Switching Capacity: 1500VA Max.
Operating Angle: 35°±10°
Contact Resistance: 5 Ohms Max.
Size: Over All Length: 0.455in (11.56mm)
Diameter: 0.768in (19.5)
Quick Connect Terminals
Tip-Over Switch (Normally Closed)
Heavy Duty Switching 
Operating Angle:
45 +/- 15 Deg Max
Switching Voltage 240 Vac
Switching Current: 0.4A
Size: Dia: 35.0mm (1.377in) H: 23.0mm (.906in)
Heavy Duty - Normally closed
contact
Operating Angle:
45 +/- 15 Deg Max
Switching Voltage: 120 Vac
Switching Current: 0.5A
Size: Dia: 19.6mm (.772in) H: 11.7mm (.461in)
Heavy Duty - Normally closed
contact
Contact Resistance:
5 Ohms Max.
Switching Voltage: 240 Vac Max.
Switching Current: 7.0A at 240 Vac / 12.5A at
120 Vac
Operating Angle: 35¬ ¬ 10¬
Size: Dia: 23.1mm (.909in) H: 11.4mm (.449in)
Normally Closed Contact
Switching Current:
1.5A Max.
Switching Capacity: 200VA Max.
Operating Angle: 2°± 0.5°
Contact Resistance: 5.0 Ohms Max.
Size: Over All Length: .430in (10.92mm)
Diameter: 0.605in (15.37mm)
Electrode Diameter: 0.030in (0.76mm)
Electrode Spacing: 0.311in (7.90mm)
Tip-Over Switch - General Purpose
Switching Voltage:
60Vac Max.
Switching Current: 0.25A Max.
Switching Capacity: 5VA Max.
Operating Angle: 6°± 2°
Contact Resistance: 5.0 Ohms Max.
Size: Over All Length: .438in (11.12mm)
Diameter: 0.482in (12.24mm)
Electrode Diameter: 0.030in (0.76mm)
Electrode Spacing: 0.311in (7.90mm)
Tip-Over Switch - General Purpose
Switching Voltage:
120Vac Max.
Switching Current: 1.5A Max.
Switching Capacity: 200VA Max.
Operating Angle: 15°± 3°
Contact Resistance: 5.0 Ohms Max.
Size: Over All Length: .470in (11.94mm)
Diameter: 0.482in (12.24mm)
Electrode Diameter: 0.030in (0.76mm)
Electrode Spacing: 0.311in (7.90mm)
Tip-Over Switch - General Purpose
Switching Voltage:
120Vac Max.
Switching Current: 1.5A Max.
Switching Capacity: -
Operating Angle: 25°±10°
Contact Resistance: 5 Ohms Max.
Size: Over All Length: 0.433in (11.0mm)
Diameter: 0.482in (12.3mm)
Electrode Diameter: 0.030in (0.76mm)
Tip-Over Switch (Normally Closed)
Switching Voltage:
120Vac Max.
Switching Current: 1.5A Max.
Switching Capacity: 100VA Max.
Operating Angle: 25°±10°
Contact Resistance: 5 Ohms Max.
Size: Over All Length: 0.433in (11.0mm)
Diameter: 0.482in (12.3mm)
Electrode Diameter: 0.030in (0.76mm)
Electrode Spacing: 0.311in (7.90mm)
Tip-Over Switch (Normally Closed) Omnidirectional
Operating Angle:
45 +/- 10 Deg Max
Switching Voltage: 240 Vac
Switching Current: 0.3A
Size: Dia: 15.3mm (.602in) H: 17.0mm (.669in)
Heavy Duty - Normally closed
contact
Contact Resistance:
5 Ohms Max.
Switching Voltage: 240 Vac Max.
Switching Current: 0.8A at 240 Vac / 1.5A at 120
Vac
Operating Angle: 70° Nominal
Size: Dia: 12.3mm (.524in) H: 10.6mm (.417mm)
Normally Closed Contact
Switching Voltage:
120Vac Max.
Switching Current: 1.0A Max.
Switching Capacity: 150VA Max.
Operating Angle: 4°±1°
Contact Resistance: 3.0 Ohms Max.
Size: Over All Length: 0.720in (18.2mm)
Diameter: 0.770in (19.56mm)
Electrode Diameter: 0.040in (1.0mm)
Electrode Spacing: 0.47in (11.9mm)
Joystick Control - Normally Open Contact
Contact Resistance:
3 Ohms Max.
Switching Voltage: 120 Vac Max.
Switching Current: 1.0A Max.
Operating Angle: 45° typ.
Size: Dia: 23.5mm (.925in) H: 10.7mm (.421in)
Normally Open Contact
Contact Resistance:
3 Ohms Max.
Switching Voltage: 120 Vac Max.
Switching Current: 1.0A Max.
Operating Angle: 25° typ.
Size: Dia: 23.5mm (.925in) H:
10.7mm (.421in)
Normally Open Contact
Contact Resistance:
3 Ohms Max.
Switching Voltage: 120 Vac Max.
Switching Current: 1.0 A Max.
Operating Angle: 10° ± 2°
Size: Dia: 23.5mm (.925in) H:
10.7mm (.421in)
Normally Open Contact
RoHS COMPLIANT
Contact Form: Normally Open
Switching Voltage: 60V Max.
Switching Current: 0.25A Max.
Switching Capacity: 3VA Max.
Operating Angle: 40°±10° Max.
Contact Resistance: 100 Ohms Max.
Operating Temperature: -38° +100°C
Size: Over All Length: 0.52in (13.25mm)
Diameter: 0.26in (6.66mm)
Electrode Diameter: 0.03in (0.76mm)
Tip-Over Switch - Omnidirectional
RoHS
COMPLIANT
Contact Form: Normally Open
Switching Voltage: 60V Max.
Switching Current: 0.25A Max.
Switching Capacity: 3VA Max.
Operating Angle: 60°±10° Max.
Contact Resistance: 6 Ohms Max. at 5Vdc
Operating Temperature: -38° +100°C
Size: Over All Length: 0.64in (16.25mm)
Diameter: 0.26in (6.61mm)
Electrode Diameter: 0.03in (0.76mm)
Tip-Over Switch - Omnidirectional 
RoHS COMPLIANT
Contact Form: Normally Open
Switching Voltage: 60V Max.
Switching Current: 0.25A Max.
Switching Capacity: 3VA Max.
Operating Angle: 60°±10° Max.
Contact Resistance: 6 Ohms Max. at 5Vdc
Operating Temperature: -38° +100°C
Size: Over All Length: 0.64in (16.25mm)
Diameter: 0.26in (6.61mm)
Electrode Diameter: 0.03in (0.76mm)
Tip-Over Switch - Omnidirectional
RoHS COMPLIANT
Contact Form: Normally Open
Switching Voltage: 60V Max.
Switching Current: 0.25A Max.
Switching Capacity: 3VA Max.
Operating Angle: 40°±10° Max.
Contact Resistance: 100 Ohms Max.
Operating Temperature: -38° +100°C
Size: Over All Length: 0.54in (13.72mm)
Diameter: 0.262in (6.66mm)
Electrode Diameter: 0.03in (0.76mm)Ref.
Tip-Over Switch
RoHS COMPLIANT
Contact Form: Normally Open
Switching Voltage: 3.6 Vdc. Max.
Switching Current: 1 mA Max.
Operating Angle: 60°±10° Max.
Contact Resistance: 1000 Ohms Max.
Operating Temperature: -37° +100°C
Size: Over All Length: 0.55in (13.97mm)
Diameter: 0.263in (6.70mm)Ref.
Electrode Diameter: 0.03in (0.76mm)
Tip-Over Switch - Omnidirectional
RoHS COMPLIANT
Contact Form: Normally Open
Switching Voltage: 3.6Vdc. Max.
Switching Current: 1 mA Max.
Operating Angle: 60°±10° Max.
Contact Resistance: 1000 Ohms Max.
Operating Temperature: -37° +100°C
Size: Over All Length: 0.779in (19.79mm)
Diameter: 0.263in (6.70mm)Ref.
Electrode Diameter: 0.03in (0.76mm)
Tip-Over Switch - Omnidirectional
RoHS COMPLIANT
Contact Form: Normally Open
Switching Voltage: 3.6Vdc. Max.
Switching Current: 1 mA Max.
Operating Angle: 60°±10° Max.
Contact Resistance: 1000 Ohms Max.
Operating Temperature: -37° +100°C
Size: Over All Length: 0.779in (19.79mm)
Diameter: 0.263in (6.70mm)Ref.
Electrode Diameter: 0.03in (0.76mm)
Tip-Over Switch - Omnidirectional
RoHS
COMPLIANT
Contact Form: Normally Open
Switching Voltage: 60V Max.
Switching Current: 0.25A Max.
Switching Capacity: 3VA Max.
Operating Angle: 40°±10° Max.
Contact Resistance: 100 Ohms Max.
Operating Temperature: -38° +100°C
Size: Over All Length: 0.52in (13.21mm)
Diameter: 0.262in (6.66mm)Ref.
Electrode Diameter: 0.03in (0.76mm)Ref.
Tip-Over Switch - Omnidirectional 
RoHS COMPLIANT
Contact Form: Normally Open
Switching Voltage: 3.6Vdc. Max.
Switching Current: 1 mA Max.
Operating Angle: 60°±10° Max.
Contact Resistance: 1000 Ohms Max.
Operating Temperature: -37° +100°C
Size: Over All Length: 0.54in (13.72mm)
Diameter: 0.263in (6.70mm)Ref.
Electrode Diameter: 0.03in (0.76mm)
Tip-Over Switch - Omnidirectional